UV#2

Approximate size 9.45x4.35

Clean the Surface: Clean the surface with 91% isopropyl alcohol to remove dust and oils, ensuring a strong bond. Allow it to dry completely.

Prep the Decal: Use a squeegee to apply firm pressure over the design (both sides) to ensure the film, ink, and adhesive are fully bonded.

Peel the Backing: Slowly peel away the white paper backing. Ensure the entire design stays on the clear transfer film.

Position and Apply: Carefully place the sticker on the surface. Note: Once it touches, it cannot be repositioned.

Press and Burnish: Use a squeegee to press the decal firmly, working from the center outward to eliminate air bubbles.

Remove Top Film: Peel away the clear film slowly at a shallow angle, ensuring the design does not lift

No refunds